PMIP3 wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== UV-CDAT versions installed by JYP ======


<WRAP center round important 60%>
This page describes versions of UV-CDAT installed by JYP, up to 2.1.0

For more recent versions, 2.8.0 and later, check the [[.cdat_conda:index|UV-CDAT conda versions installed by JYP]] page
</WRAP>

<WRAP center round tip 60%>
[[https://github.com/UV-CDAT/uvcdat/wiki/Roadmap-to-Release|Official list of available versions]]
</WRAP>

<WRAP center round tip 60%>
Installation tutorial for UV-CDAT up to 2.4.0

[[https://docs.google.com/presentation/d/1U8RSmzoIKfQlwrXeJUbFRZPXYv6yxr1OO82QyV1cz2s/edit#slide=id.p14|UV-CDAT Build 101]]
</WRAP>



===== Useful links =====

  * [[https://github.com/UV-CDAT/uvcdat|UV-CDAT @ github]]
  * [[https://github.com/UV-CDAT/uvcdat/issues?state=open|UV-CDAT issues @ github]]

===== 2.1.0 =====

Official details : 

cdat_multi configuration version: 13

==== Available configurations ====

^  Machine  ^  Config  ^  Python/date  ^ Notes  ^
|  LSCE  |  LSCE_13  |  2.7.8, Jan 22 2015  | **Red Hat Enterprise Linux Server release 6.6 (Santiago)**\\ Used system's cmake (2.8.12.2) and the same recompiled Qt (4.8.5) used for uv-cdat 1.5.1 |
|  ciclad  |  ciclad_13  |  2.7.8, Feb  5 2015  | **Scientific Linux release 6.6 (Carbon)**\\ Used system's cmake (2.8.12.2) and the same recompiled Qt (4.8.5) used for uv-cdat 1.5.1 |
|  VirtualBox\\ FC20  |  VB_13  |  2.7.8, Feb  2 2015  | **Fedora release 20 (Heisenbug)**\\ Used system's cmake (2.8.12.2) and Qt (4.8.6-18.fc20.x86_64) |

==== Log files ====

^  Machine  ^  make  ^  ctest  ^
|  LSCE  | {{:other:uvcdat:|txt}} | {{:other:uvcdat:|txt}} |
|  ciclad | {{:other:uvcdat:|txt}} | {{:other:uvcdat:|txt}} |
|  VirtualBox\\ FC20  | {{:other:|txt}} | {{:other:|txt}} |

=== make summary ===

<code>
              --- WARNING ---

2 Packages reported as FAILED, see logs

                contrib/pyclimate
                contrib/MSU
</code>


=== ctest summary ===

In a new installation, test #343 (//diags_test_01//) will **fail** the first time **ctest** is called because the test data in the **UVCMETRICS_TEST_DATA_DIRECTORY** directory is not available

<code>
99% tests passed, 1 tests failed out of 343

Total Test time (real) = 478.10 sec

The following tests FAILED:
        343 - diags_test_01 (Failed)
Errors while running CTest
</code>

If you run **ctest -D Experimental**, the test data is downloaded and all tests pass!

<code>
100% tests passed, 0 tests failed out of 343

Total Test time (real) = 697.55 sec
</code>

==== ccmake options ====


<code>
ccmake -D GIT_PROTOCOL=git:// -DCDAT_BUILD_MODE=DEFAULT -DCDAT_BUILD_CMOR=ON -D CMAKE_INSTALL_PREFIX=$CDAT_INSTALL   -D CDAT_BUILD_BASEMAP=ON -D CDAT_BUILD_MATPLOTLIB=ON -D CDAT_BUILD_SCIENTIFICPYTHON=ON -D CDAT_BUILD_SCIKITS=ON -D CDAT_BUILD_SHAPELY=ON -D CDAT_BUILD_JINJA2=ON -D CDAT_BUILD_PYGMENTS=ON -D CDAT_BUILD_PYZMQ=ON -D CDAT_BUILD_SPHINX=ON -D CDAT_BUILD_TORNADO=ON -D UVCMETRICS_TEST_DATA_DIRECTORY=/<some_scratch_directory>/uvcmetrics_test_data -D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON   $CDAT_MAIN_DIR
</code>

=== BUILD_TESTING ===

Note: we have **not** explicitly requested to turn on the testing, because it is supposed to be //ON// by default

=== GIT_PROTOCOL ===

We have used **-D GIT_PROTOCOL=git:%%//%%**. See the [[#section151|1.5.1 options]] for more details

=== CDAT_BUILD_MODE ===

We want to get //most of the useful stuff//. Check [[https://github.com/UV-CDAT/uvcdat/wiki/Install-from-source-command-line-options|Install from source command line options]] for more details

**-DCDAT_BUILD_MODE=DEFAULT**

=== CDAT_BUILD_CMOR ===

We need to experiment with CMOR...

**-DCDAT_BUILD_CMOR=ON**

=== Misc options ===

^  What do we want?  ^  ccmake option  ^
| basemap | -D CDAT_BUILD_BASEMAP=ON |
| matplotlib | -D CDAT_BUILD_MATPLOTLIB=ON |
| [[http://dirac.cnrs-orleans.fr/plone/software/scientificpython/|scientificpython]] | -D CDAT_BUILD_SCIENTIFICPYTHON=ON |
| sckikits\\ if we want to experiment later with scikit image| -D CDAT_BUILD_SCIKITS=ON |
| shapely seems useful for dealing with data on irregular grids | -D CDAT_BUILD_SHAPELY=ON |
| ipython notebook\\ some users may want to play with that | -D CDAT_BUILD_JINJA2=ON -D CDAT_BUILD_PYGMENTS=ON -D CDAT_BUILD_PYZMQ=ON -D CDAT_BUILD_SPHINX=ON -D CDAT_BUILD_TORNADO=ON |

=== UVCMETRICS_TEST_DATA_DIRECTORY ===

**-D UVCMETRICS_TEST_DATA_DIRECTORY=/<some_scratch_directory>/uvcmetrics_test_data**

The content of this directory is required for ctest **Test #343: diags_test_01** to pass. Strangely, it is only downloaded when you run **ctest -D Experimental**, so **ctest** (without //-D Experimental//) fails test #343 the first time... 

=== LIBXML2 & LIBXSLT ===

We have tried to use the system's installed //libxml2// and //libxslt// libraries by using the following options:

**-D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON**

Unfortunately, uvcdat still compiles the new version of the libraries, and then the system's cmake gets confused and we get **lots** of warning messages of the following kind each time cmake is called. See [[https://github.com/UV-CDAT/uvcdat/issues/444|issue 444]] for more details

<code>
cmake --version
cmake: /home/share/unix_files/cdat/versions/cdat_install_uv-2.1.0_x86_64_gcc4_13/Externals/lib/libxml2.so.2: no version information available (required by /usr/lib64/libarchive.so.2)
cmake: /home/share/unix_files/cdat/versions/cdat_install_uv-2.1.0_x86_64_gcc4_13/Externals/lib/libxml2.so.2: no version information available (required by /usr/lib64/libarchive.so.2)
cmake: /home/share/unix_files/cdat/versions/cdat_install_uv-2.1.0_x86_64_gcc4_13/Externals/lib/libxml2.so.2: no version information available (required by /usr/lib64/libarchive.so.2)
cmake: /home/share/unix_files/cdat/versions/cdat_install_uv-2.1.0_x86_64_gcc4_13/Externals/lib/libxml2.so.2: no version information available (required by /usr/lib64/libarchive.so.2)
cmake version 2.8.12.2
</code>

==== System specific notes ====

=== VB_13 installation ===

  * During the compilation, make fails because of the VTK/Mesa/OpenGL/FedoraCore20 related problem detailed in [[https://github.com/UV-CDAT/uvcdat/issues/983|issue 983]]\\ \\ Solution: uncomment the **#define GLX_GLXEXT_LEGACY** line in //build/build/VTK/Rendering/OpenGL/vtkXOpenGLRenderWindow.cxx// and restart the compilation

  * After resuming the compilation with the above patch, the compilation fails because of a CMOR related make/Makefile error described in [[https://github.com/PCMDI/cmor/issues/14|CMOR issue 14]]\\ \\ Solution: indent lines 156 and 157 with a **Tab** instead of 8 spaces in build/build/cmor/Makefile and restart the compilation

==== Disk space ====

The following disk space was required for the installation

^  Machine  ^  -A-\\ \\ cmake compile\\ (1)  ^  -B-\\ \\ cmake install  ^  -C-\\ \\ qt compile\\ (1)  ^  -D-\\ \\ qt install  ^  -E-\\ \\ cdat src\\ (2?)  ^  -F-\\ \\ cdat build\\ (2)  ^  -G-\\ \\ cdat install\\ (2)  ^  -H-\\ \\ Externals\\  (3)\\  Sub-dir of install  ^  -I-\\ \\ Installation\\ space\\  (4)  ^  -J-\\ \\ Final\\ space\\ (5)  ^
|  LSCE  |  0 (6)  |  0 (6)  |  1.6G  |  451M  |    |    |    |    |    |    |
|  ciclad  |  0 (6)  |  0 (6)  |  ?  |  455M  |  578M  |  4.7G  |  1.6G  |  545M  |  7.3  |  2.0  |
|  VirtualBox\\ FC20  |  0 (6)  |  0 (6)  |  0 (6)  |  0 (6)  |  565M  |  5.0G  |  1.7G  |  511M  |  7.3  |  1.7  |

Notes:
  * (1) The compilation directories of cmake and Qt can be removed once the installation of cmake/Qt is finished (ie can be removed before starting with uv-cdat)
  * (2) The packages required for the GUI, and Paraview, were not installed and would probably require even more space
  * (3) The size of this directory can change depending on the dependencies use from what's already available on the system (xml2 and xslt in this installation) and what we recompile
  * (4) Sum of the columns, if we erase the A/C directories: B + D + E + F + G
  * (5) Sum of the columns, if we erase the B/E/F directories: D + G
  * (6) We used the version available on the system (that was enough up-to-date)



===== 2.0.0 =====

Official details : 

cdat_multi configuration version: 12

===== 2.0.beta =====

Official details : [[https://github.com/UV-CDAT/uvcdat/wiki/Roadmap-to-Release#release-planned-july-2014|2.0.beta]]

cdat_multi configuration version: 11

==== Available configurations ====

^  Machine  ^  Config  ^  Python/date  ^ Notes  ^
|  LSCE  |  LSCE_11  |  2.7.7, Aug  1 2014  | Used the same recompiled cmake and Qt as for 1.5.1 |
|  ciclad |  ciclad_11-ng  |  2.7.7, Aug  4 2014  | Used the same recompiled cmake and Qt as for 1.5.1 |

==== Log files ====

^  Machine  ^  make  ^  ctest  ^
|  LSCE  | {{:other:uvcdat:lsce_cdat_make_uv-2.0.beta_x86_64_gcc4_20140801_1801.txt|txt}} | {{:other:uvcdat:lsce_cdat_ctest_uv-2.0.beta_x86_64_gcc4_20140804_1209.txt|txt}} |
|  ciclad-ng  | {{:other:uvcdat:ciclad-ng_cdat_make_uv-2.0.beta_x86_64_gcc4_20140804_1725.txt|txt}} | {{:other:uvcdat:ciclad-ng_cdat_ctest_uv-2.0.beta_x86_64_gcc4_20140805_1017.txt|txt}} |

=== make summary ===

<code>
2 Packages reported as FAILED, see logs

                contrib/pyclimate
                contrib/MSU
</code>


=== ctest summary ===

<code>
53% tests passed, 35 tests failed out of 74

Total Test time (real) = 1020.63 sec

The following tests FAILED:
          2 - cdms_test (Failed)
          3 - cdms_verify (Failed)
          4 - cdms_load_and_plot_axis_variable (Failed)
          5 - run_uvcdat_gui_tests (Failed)
          6 - test177_regrid_mask (Failed)
          8 - testDoutriaux (Failed)
          9 - testMarvel (Failed)
         10 - testUnits (Failed)
         11 - testRaynaud (Failed)
         12 - testDateline (Failed)
         14 - testDiag (Failed)
         15 - testSo2TasACCESSFails (Failed)
         16 - testSo2Tas (Failed)
         17 - testWrite (Failed)
         18 - testMvCdmsRegrid (Failed)
         21 - testConserv (Failed)
         22 - testEsmfVsLibcf (Failed)
         23 - testEsmfInterface1 (Failed)
         28 - testTasRegrid (Failed)
         30 - testRegrid2 (Failed)
         34 - testEsmf_3x4_6x8_Conserve_Masked (Failed)
         36 - testMvGenericRegrid (Failed)
         37 - testSalinity (Failed)
         38 - testEsmfSalinity (Failed)
         39 - testEsmf (Failed)
         40 - testBergman (Failed)
         41 - testDistSrc (Failed)
         43 - vcs_verify_import (Failed)
         44 - vcs_verify_init (Failed)
         45 - vcs_verify_boxfill_basics (Failed)
         46 - vcs_verify_proj_basics (Failed)
         47 - vcs_verify_fillarea_basics (Failed)
         66 - CDMS_Test_17 (Failed)
         68 - CDMS_Test_multiple_formats (Failed)
         74 - diags_test_01 (Failed)
</code>

==== ccmake options ====


<code>
ccmake -D GIT_PROTOCOL=git:// -D CDAT_BUILD_PARALLEL=OFF -D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON -D CMAKE_INSTALL_PREFIX=$CDAT_INSTALL $CDAT_MAIN_DIR
</code>

==== Installation environment ====

=== LSCE ===

Same as for 1.5.1

=== ciclad-ng ===

Same as for 1.5.1

=== VirtualBox FC20 ===

==== Disk space ====

The following disk space was required for the installation

==== Extra packages installed ====

=== Requests: HTTP for Humans ===

Web site: http://docs.python-requests.org/en/latest/

Install: ''pip install requests''


===== 1.5.1 =====

Official details : [[https://github.com/UV-CDAT/uvcdat/wiki/Roadmap-to-Release#151-april-9th-2014|1.5.1]]

cdat_multi configuration version: 10

==== Special warning ====

The default backend for matplotlib (Agg) could not be used for interactive graphics and we had to manually update the content of the default matplotlibrc

<code>
<INSTALL>/lib/python2.7/site-packages/matplotlib/mpl-data/matplotlibrc

#backend      : Agg
backend      : Qt4Agg
</code>

==== Available configurations ====

^  Machine  ^  Config  ^  Python/date  ^ Notes  ^
|  LSCE  |  LSCE_10  | 2.7.4, Apr 23 2014 | Had to use recompiled\\ cmake (2.8.12.2) and Qt (4.8.5)\\ because the system ones\\ were too old|
|  ciclad  |  ciclad_10  |  **FAILED**\\ :-(  | Linux too old,\\ even when specifying recent\\ gcc44/gfortran44/g++44 compilers,\\ we end up with too many problems, ... :-(  |
|  ciclad-ng  |  ciclad_10-ng  |  2.7.4, Apr 22 2014 | Had to use recompiled\\ cmake (2.8.12.2) and Qt (4.8.5)\\ because the system ones\\ were too old |
|  VirtualBox\\ FC20  |  VB_10  | |

==== Log files ====

^  Machine  ^  make  ^  ctest  ^
|  LSCE  |  {{:other:uvcdat:cdat_make_uv-1.5.1_x86_64_gcc4_20140423_1108.txt|txt}}  |  {{:other:uvcdat:cdat_ctest_uv-1.5.1_x86_64_gcc4_20140423_1148.txt|txt}}  |
|  ciclad  |  :-(  |  :-(  |
|  ciclad-ng  |  {{:other:uvcdat:cdat_make_uv-1.5.1_x86_64_gcc4_20140422_1445.txt|txt}}  |  {{:other:uvcdat:cdat_ctest_uv-1.5.1_x86_64_gcc4_20140422_1541.txt|txt}}  |
|  VirtualBox\\ FC20  |  {{:other:uvcdat:cdat_make_uv-1.5.1_x86_64_gcc4_vb_20140427_2220.txt|txt}}  |  {{:other:uvcdat:cdat_ctest_uv-1.5.1_x86_64_gcc4_vb_20140427_2352.txt|txt}}  |

=== make summary ===

<code>
3 Packages reported as FAILED, see logs

                contrib/pyclimate
                contrib/MSU
                contrib/windspharm
</code>

=== ctest summary ===

<code>
89% tests passed, 8 tests failed out of 71

The following tests FAILED:
          1 - run_uvcdat (Failed)
          2 - cdms_test (Failed)
          3 - cdms_verify (Failed)
          4 - cdms_load_and_plot_axis_variable (Failed)
          5 - run_uvcdat_gui_tests (Failed)
         44 - vcs_test_anim_basic (Failed)
         64 - CDMS_Test_18 (Failed)
         66 - CDMS_Test_multiple_formats (Failed)
Errors while running CTest

</code>

==== ccmake options ====


<code>
ccmake -D GIT_PROTOCOL=git:// -D CDAT_BUILD_PARALLEL=OFF -D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON -D CDAT_BUILD_PARAVIEW=OFF -D CDAT_BUILD_GUI=OFF -D CMAKE_INSTALL_PREFIX=$CDAT_INSTALL $CDAT_MAIN_DIR
</code>

=== BUILD_TESTING ===

If you want to test UV-CDAT with 'ctest' after the build, it must be installed with **-D BUILD_TESTING=ON** (which seems to be defined by default so we have not added it explicitly to the ccmake options)

=== GIT_PROTOCOL ===

It's better to specify explicitly the git protocol to use for downloading submodules in $CDAT_MAINDIR/contrib (**-D GIT_PROTOCOL=git:%%//%%** for all the machines we used), otherwise ccmake gets stuck in a long guru meditation when it's waiting/trying to download external sources.

In order to determine which protocol to use, go to a temporary directory and check by hand which protocol is working. If nothing happens (seems to hang and you have to interrupt with CTRL-C), it's NOT working:

  * git clone http:%%//%%github.com/UV-CDAT/scimake.git 
  * git clone git:%%//%%github.com/UV-CDAT/scimake.git

IF "git clone git" fails, THEN specify '-D GIT_PROTOCOL=http:%%//%%', otherwise specify '-D GIT_PROTOCOL=git:%%//%%'

WARNING! WARNING! Check the git protocol overrides remaining from previous CDAT installations with **git config --global -l**, in remove some lines in ~/.gitconfig if need be...

=== CDAT_BUILD_PARALLEL ===

We have used **-D CDAT_BUILD_PARALLEL=OFF** in order to disable parallelism and avoid potential mpi-related problems

<note warning>What is really disabled/affected by this option??</note>

=== LIBXML2 & LIBXSLT ===

We have used the following options in order to use the xml2/xslt libraries preinstalled on the system and avoid potential compilation problems. As of version 1.5.1, uv-cdat can compile libxml2 if the one available on the system is too old, but the rest of the installation still picks up the old system xml2 library :-(

**-D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON**

=== CDAT_BUILD_GUI ===

We have to disable the GUI in 1.5.0-1, with **-D CDAT_BUILD_GUI=OFF**. Otherwise ccmake does not work due to vistrails related problems :-(

=== CDAT_BUILD_PARAVIEW ===

Paraview can't be installed, due to R include files not found. Disabling the GUI with ''-D CDAT_BUILD_GUI=OFF'' is not enough, so we have to disable it with **-D CDAT_BUILD_PARAVIEW=OFF**. We then have a problem with pixman being built before freetype so we have to add that pixman depends on freetype

''in src/CMake/cdat_modules/pixman_deps.cmake:''

''set(pixman_deps ${pkgconfig_pkg} ${zlib_pkg})''

=> ''set(pixman_deps ${pkgconfig_pkg} ${zlib_pkg} ${freetype_pkg})''

==== Installation environment ====

=== LSCE ===

|  /etc/redhat-release  | Red Hat Enterprise Linux Server release 6.5 (Santiago) |
|  uname -a  | Linux asterix1 2.6.32-431.3.1.el6.x86_64\\ #1 SMP Fri Dec 13 06:58:20 EST 2013 x86_64 x86_64 x86_64 GNU/Linux |
|  gcc  | gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  gfortran  | GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  g++  | g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  Qt  | qt-4.6.2-28.el6_5.x86_64 **=> had to install 4.8.5** |
|  cmake  | cmake-2.6.4-5.el6.x86_64 **=> had to install 2.8.12.2** |


=== ciclad ===

|  /etc/redhat-release  | CentOS release 5.2 (Final) |
|  uname -a  | Linux ciclad1.ipsl.jussieu.fr 2.6.18-348.4.1.el5\\ #1 SMP Tue Apr 16 15:40:06 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux |
|  **gcc44**  | gcc44 (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
|  **gfortran44**  | GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
|  **g++44**  | g++44 (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
|  Qt  | qt4-4.7.4-0 **=> had to install 4.8.5** |
|  cmake  | cmake-2.6.4-5.el5.2 **=> had to install 2.8.12.2** |


=== ciclad-ng ===

|  /etc/redhat-release  | Scientific Linux release 6.5 (Carbon) |
|  uname -a  | Linux ciclad-ng.private.ipsl.fr 2.6.32-431.11.2.el6.x86_64\\ #1 SMP Tue Mar 25 11:15:18 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux |
|  gcc  | gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  gfortran  | GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  g++  | g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
|  Qt  | qt-4.6.2-26.el6_4.x86_64 **=> had to install 4.8.5** |
|  cmake  | cmake-2.6.4-5.el6.x86_64 **=> had to install 2.8.12.2** |


=== VirtualBox FC20 ===

|  /etc/redhat-release  | Fedora release 20 (Heisenbug) |
|  uname -a  | Linux lsce3017.extra.cea.fr 3.13.10-200.fc20.x86_64\\ #1 SMP Mon Apr 14 20:34:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux |
|  gcc  | gcc (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
|  gfortran  | GNU Fortran (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
|  g++  | g++ (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
|  Qt  | qt-4.8.5-15.fc20.x86_64 |
|  cmake  | cmake-2.8.12.2-2.fc20.x86_64 |

==== Disk space ====

The following disk space was required for the installation

^  Machine  ^  -A-\\ \\ cmake compile\\ (1)  ^  -B-\\ \\ cmake install  ^  -C-\\ \\ qt compile\\ (1)  ^  -D-\\ \\ qt install  ^  -E-\\ \\ cdat src\\ (2?)  ^  -F-\\ \\ cdat build\\ (2)  ^  -G-\\ \\ cdat install\\ (2)  ^  -H-\\ \\ Externals\\  (3)\\  Sub-dir of install  ^  -I-\\ \\ Installation\\ space\\  (4)  ^  -J-\\ \\ Final\\ space\\ (5)  ^
|  LSCE  |  230M  |  69M  |  1.6G  |  451M  |  407M  |  3.2G  |  1.1G  |  372M  |  5.21G  |  1.54G  |
|  ciclad  |  ?  |  66M  |  ?  |  455M  |  407M  |  2.8G\\ FAILED :-(  |  390M\\ FAILED :-(  |  176M\\ FAILED :-(  |  :-(  |  :-(  |
|  ciclad-ng  |  ?  |  69M  |  ?  |  449M  |  407M  |  3.1G  |  1.1G  |  366M  |  5.10G  |  1.54G  |
|  VirtualBox\\ FC20  |  0 (6)  |  0 (6)  |  0 (6)  |  0 (6)  |  407M  |  3.6G  |  1.2G  |  325M  |  5.20G  |  1.2G  |

Notes:
  * (1) The compilation directories of cmake and Qt can be removed once the installation of cmake/Qt is finished (ie can be removed before starting with uv-cdat)
  * (2) The packages required for the GUI, and Paraview, were not installed and would probably require even more space
  * (3) The size of this directory can change depending on the dependencies use from what's already available on the system (xml2 and xslt in this installation) and what we recompile
  * (4) Sum of the columns, if we erase the A/C directories: B + D + E + F + G
  * (5) Sum of the columns, if we erase the B/E/F directories: D + G
  * (6) We used the version available on the system (that was enough up-to-date)


===== 1.5.0 =====

Official details : n/a

cdat_multi configuration version: 09

Check the installation details of [[other:uvcdat:installed#section151|1.5.1]] above. Installation tests of 1.5.0 were stopped as soon as 1.5.1 was available

^  Machine  ^  Config  ^  Notes  ^
| LSCE | LSCE_09 | |

===== 1.1.0 =====

Official details : n/a

cdat_multi configuration version: 08

^  Machine  ^  Config  ^  Python/date  ^ Notes  ^
| LSCE | LSCE_08 | 2.7.3, Nov 13 2012 | |
| TGCC | curie_08 | 2.7.3, Oct 29 2012 | The only CDAT available @ TGCC\\ as of April 2014 |

===== 6.0.0.alpha =====

Official details : n/a

cdat_multi configuration version: 02

^  Machine  ^  Config  ^  Python/date  ^  Notes  ^
| ciclad | ciclad_02 | 2.7.1, Aug 12 2011 | |

/* standard page footer */

\\ \\ \\ 
----
[ [[pmip3:|PMIP3 Wiki Home]] ] -
[ [[pmip3:wiki_help|Help!]] ] -
[ [[wiki:syntax|Wiki syntax]] ]