User Tools

Site Tools


other:ssh

This is an old revision of the document!


Understanding and using ssh correctly

Everything you always wanted to know about ssh, ssh keys, the passphrase and ssh agent, but were afraid to ask

At least everything you need to know in order to work efficiently, without getting bored to death

A quick introduction

  • ssh is a program for connecting securely to a remote server and for executing commands on this server
    • More precisely ssh is an SSH client using the SSH protocol
  • We assume below that you have a my_login account on the remote remote_server computer, and that you know your password
  • Many programs are said to work over ssh when they implicitly use the ssh protocol to securely transfer data from one server to another: scp (copy remote directories and files), rsync (synchronize remote directories and files), …
  • Some history: before you were born, and the world and internet were a safer place, people used less secure programs like telnet, rlogin, rsh, ftp, …

Using ssh

Standard usage

  • The following will work in a Linux terminal, but can also work in a terminal on a Mac or on a Windows 10 computer
  • On Windows 10, ssh is directly available in a Windows Powershell, a Windows Terminal or the old cmd, but the most user-friendly way to use ssh is to use PuTTY
  • On a Mac, ssh is directly available in the built-in Apple Terminal application (available in /Applications/Utilities), or the more powerful iTerm2 application
    • A Terminal window will open a local Linux-like shell session on the Mac, where you can use ssh to connect to another server
  • ssh [options] [my_login@]remote_server
    • If your login is the same on the local and remote computer, you can omit the optional my_login@ part:
      e.g. simply use ssh ssh1.lsce.ipsl.fr instead of ssh my_login@ssh1.lsce.ipsl.fr
    • The first time you connect to a new server, ssh will ask if you are sure of what you are doing, and then store some unique information about the remote server in the known_hosts file (details).
      PS C:\Users\my_login> ssh ciclad.ipsl.jussieu.fr
      The authenticity of host 'ciclad.ipsl.jussieu.fr (134.157.176.129)' can't be established.
      RSA key fingerprint is SHA256:n6wFvMaJuyInd0LNhp78dfMd04Dr751lEekcU7X2UfU.
      Are you sure you want to continue connecting (yes/no)? yes
      Warning: Permanently added 'ciclad.ipsl.jussieu.fr,134.157.176.129' (RSA) to the list of known hosts.
      my_login@ciclad.ipsl.jussieu.fr: Permission denied (publickey,hostbased).


      ssh will automatically check this security information each time you connect to the same server, and warn you if something seems wrong.

Most common options

  • -t command: this option allows you to execute a specific command on the remote server (without displaying the output of the initial ssh). We use this mostly to chain ssh connections, when we want to automatically go through a specific gateway server to access another server
    e.g. ssh -A -X my_login@ssh1.lsce.ipsl.fr -t ssh -A -X obelix
  • -v: verbose mode. Use this option only when you can't connect, or things don't seem to work correctly. Analyzing the verbose output when you start ssh should allow you, or the system administrators, to find out what is wrong

Connecting to servers commonly used by LSCE users

LSCE servers

There are several ways to use ssh to connect to the LSCE obelixNN servers (more details about the available LSCE servers)

  • If your computer is on the LSCE ethernet/wired network:
    • Go to the server with the smallest load:
      ssh -A -X my_LSCE_login@obelix
      or ssh -A -X my_LSCE_login@obelix.lsce.ipsl.fr
    • Go to a specific obelixNN (possibly because you have some running processes on this server that you want to monitor with top, or terminate with kill)
      e.g. ssh -A -X my_LSCE_login@obelix4
  • If your computer is outside LSCE, or on the LSCE WiFi network, you have to:
    • Ask your advisor to send a mail to help-lsce, and request an access to the ssh1 server
    • Connect through the ssh1 gateway server, i.e you first use ssh to connect to the ssh1 gateway, and then use ssh to go to an obelix server
      These two ssh commands can be conveniently chained with the '-t' option!
      ssh -A -X my_LSCE_login@ssh1.lsce.ipsl.fr -t ssh -A -X obelix

IPSL servers

If you want to connect to the IPSL servers (only possible with ssh keys!):

  • Connecting to ciclad:
    ssh -A -X my_ciclad_login@ciclad.ipsl.jussieu.fr

TGCC servers

If you want to connect to the the TGCC servers:

  • Connecting to irene:
    • Note: you have to go trough ssh1, even if you are on the LSCE network!
    • ssh -A -X my_LSCE_login@ssh1.lsce.ipsl.fr -t ssh -A -X my_TGCC_login@irene-ccrt.ccc.cea.fr
    • The TGCC connection details may vary, depending on your login type

IDRIS servers

FIXME

Using shell aliases shortcuts to connect to the servers

If you have to use ssh regularly (with the appropriate options), you should define convenient shell aliases, or add PuTTY connection profiles on Windows

bash shell users

Define the following aliases in the ~/.bashrc configuration file of your local Linux account

# Connecting to LSCE from a computer on the LSCE network
alias obelix='ssh -A -X my_LSCE_login@obelix'

# Connecting to LSCE from outside the LSCE network
alias sobelix='ssh -A -X my_LSCE_login@ssh1.lsce.ipsl.fr -t ssh -A -X obelix'

# Connecting to ciclad @ IPSL
alias ciclad='ssh -A -X my_ciclad_login@ciclad.ipsl.jussieu.fr'

# Connnecting to irene @ TGCC
alias sirene='ssh -A -X my_LSCE_login@ssh1.lsce.ipsl.fr -t ssh -A -X my_TGCC_login@irene-ccrt.ccc.cea.fr' 

tcsh shell users

If your connection shell is tcsh instead of bash, use the appropriate alias syntax in your ~/.cshrc configuration file,
e.g. alias obelix 'ssh -A -X my_LSCE_login@obelix'

Using an X server to display graphics

A terminal can be used to display text information
e.g. the output of ls and top, the vi editor, etc…
but also to start programs that will open new (graphical) windows outside of the initial terminal
e.g. evince to display pdf files, eog to display png/jpg images, the emacs editor, ferret, etc…

If you want to use ssh to start graphical programs on a remote server, you need to:

  • Use ssh -X (or ssh -Y if -X does not work) to connect to the remote server
    • -X: enable X11 forwarding
    • -Y: enable trusted X11 forwarding (low security, but you trust the remote server)
    • Using the -X/-Y option will automatically define the DISPLAY environment variable that is required by graphical programs on the remote server to determine where to display the graphical windows.
      DISPLAY will not be defined if you forget to use -X/-Y
    • Example:
      my_login@my_local_computer:~$ echo $DISPLAY
      localhost:0.0
      
      my_login@my_local_computer:~$ ssh ssh1.lsce.ipsl.fr
      Last login: Wed Jul  8 14:45:31 2020 from [...some address...]
      [my_login@ssh1 ~]$ echo $DISPLAY
      DISPLAY: Undefined variable.
      [my_login@ssh1 ~]$ logout
      Connection to ssh1.lsce.ipsl.fr closed.
      
      my_login@my_local_computer:~$ ssh -X ssh1.lsce.ipsl.fr
      [my_login@ssh1 ~]$ echo $DISPLAY
      localhost:43.0

Configuration files

ssh will store all its configuration text files in a .ssh sub-directory of your home directory

  • Linux: ~/.ssh/ directory
  • Windows: C:\Users\your_windows_login\.ssh directory
  • Mac: /Users/your_mac_login/.ssh directory (should be the same path as ~/.ssh/)

You will find (some of) the following text files:

  • known_hosts: the text file were ssh stores one line of security information about each server you have connected to from this computer
    e.g. ciclad.ipsl.jussieu.fr,134.157.176.253 ssh-rsa AAAAB3NzaC1y[a long identifier…]
  • config: an optional configuration text file, e.g.
    # Empty lines and lines starting with '#' are "comments"
    # More details => man ssh_config
    
    ServerAliveInterval=120
    ServerAliveCountMax=90
  • ssh keys related information
    • authorized_keys: the public key(s) of the account(s) authorized to connect to this account.
    • the private (and possibly the public) ssh key(s) used on this account

PuTTY is a convenient and user-friendly ssh client for Windows

  • Built-in: Terminal application (available in /Applications/Utilities)
  • Recommended: the iTerm2 application
    • Improved Favorite Sessions settings

Solving common problems

  • Other types of errors: remember that you can run ssh in verbose mode to help you determine what is wrong (-v option)

Copying files between servers/computers

Sometimes you need to copy files from one remote server (or your desktop) to the other. The files can be securely copied over ssh with the scp command

Note: you should keep the big data files were their original version is instead of duplicating them, and move the data processing (your scripts, etc…) to the server where the original files are located (e.g. the ciclad server at IPSL)

Copying files with scp

Note: the following will work in a Linux terminal, but can also work in a terminal on a Mac or on a Windows 10 computer (scp is directly available in Windows Powershell, Windows Terminal or the old cmd, but it is not the most user-friendly way to use scp on Windows)

If you have a Windows computer, it is much easier to use WinSCP for copying files

  • scp [options] local_path_or_file(s) [my_login@]remote_server:remote_path
    or scp [options] [my_login@]remote_server:remote_path_or_file(s) local_path
    • If your login is the same on the local and remote computer, you can omit the optional my_login@ part
    • If you are copying files from a remote server to the current local directory, you can use . instead of the full path of the local directory:
      $ cd /some/path
      $ scp -p ssh1.lsce.ipsl.fr:/some/remote/path/scatter_regress_example.py .
      scatter_regress_example.py                    100% 4988   134.6KB/s   00:00
    • if you need to use wildcards to specify the files you want to copy, you can use quotes around the path specification:
      $ scp -p ssh1.lsce.ipsl.fr:'/some/remote/path/matplotlib/plot_lat_test.*' .
      plot_lat_test.eps                             100%   43KB   1.0MB/s   00:00
      plot_lat_test.pdf                             100%   20KB 853.8KB/s   00:00
      plot_lat_test.png                             100%   77KB   1.5MB/s   00:00
  • Most common options:
    • -p: preserves modification times, access times, and modes from the original file.
      This option is very useful if you want the copied file(s) to have the same date/time as the original file(s). Otherwise, the time will be the time when you copy the file(s)…
    • -r: recursively copy entire directories.
      You have to use this option if the source location is a directory. scp -r will copy the complete content of the directory (including sub-directories)

WinSCP is a convenient and user-friendly scp client for Windows

FIXME

Mirroring directories with rsync

In some cases, you may want to mirror the content of directories:

  • because you are creating a backup
  • because you have lots of files, possibly (very) big, and you don't want to start copying everything again if the copy fails for some reason (e.g. temporary network problems if you transfer data between servers)
  • mirroring means that, after running rsync, the SRC (Source) and DST (Destination) directories will have the exact same content (files in DST and not in SRC will be deleted)

rsync is a convenient Linux command that can be used for mirroring a directory hierarchy to another location on the same computer (e.g. a removable disk), or a remote Linux machine, over ssh.

Mirroring means, in the rsync case, that we will only copy new or changed files. The first copy may take some time, but will be much faster afterwards, when only a few files have been created/changed and have to be copied. Or, if a copy is interrupted, the files already copied will not be copied a second time.

Warning! It is easy to lose files with rsync if you use the wrong syntax or options!

Mirroring no files by mistake, to a place where there are files, when using the --delete option, means that existing files or whole directory hierarchies will be deleted!

  • Be sure to understand the basic options, and use --dry-run (simulate what would be done) and -v (verbose) before performing the actual mirroring
  • Having a trailing / or not behind a directory name makes a difference!

Basic rsync syntax

Note: use man rync to get all the details and options

Local usage: rsync [OPTIONS] SRC DEST

Remote usage (i.e. the SRC and DEST directories are on different Linux machines):

         Pull: rsync [OPTIONS] [USER@]HOST:SRC... DEST
         Push: rsync [OPTIONS] SRC... [USER@]HOST:DEST
-a, --archive               archive mode; equals -rlptgoD (no -H,-A,-X)
        -r, --recursive             recurse into directories
        -l, --links                 copy symlinks as symlinks
        -p, --perms                 preserve permissions
        -t, --times                 preserve modification times
        -g, --group                 preserve group
        -o, --owner                 preserve owner (super-user only)
            --devices               preserve device files (super-user only)
            --specials              preserve special files
        -D                          same as --devices --specials


-v, --verbose               increase verbosity
-z, --compress              compress file data during the transfer
-W, --whole-file            copy files whole (w/o delta-xfer algorithm)
-C, --cvs-exclude           auto-ignore files in the same way CVS does
             RCS SCCS CVS CVS.adm RCSLOG cvslog.* tags TAGS .make.state .nse_depinfo *~ #* .#* ,*  _$*
             *$  *.old  *.bak  *.BAK *.orig *.rej .del-* *.a *.olb *.o *.obj *.so *.exe *.Z *.elc *.ln
             core .svn/ .git/ .hg/ .bzr/

--delete                delete extraneous files from dest dirs

-n, --dry-run               perform a trial run with no changes made
-c, --checksum              skip based on checksum, not mod-time & size

Examples

  • We have an existing source /mnt/h/test/ directory that we would like to mirror to another disk or destination, as /mnt/i/test/.
    i.e we want to recursively copy the content of test/ to a test/ directory somewhere else

    The examples below are on the same machine, but we could do a copy/mirror over ssh by just adding [USER@]HOST: in front of the Source or Destination directory

    • Show what would be done, but do not do it (yet)
      Note that we have a trailing / after the source directory, and NO / after the destination directory
      rsync --dry-run -avW -C /mnt/h/test/ /mnt/i/test
      • Note: using -C makes sure that files and directories considered as temporary will not be copied.
        Do NOT use the -C option if you really want to copy all the files!
    • Same as above, without the verbose mode. Probably nothing will be displayed on the screen
      rsync --dry-run -aW -C /mnt/h/test/ /mnt/i/test
    • Actually copy the files, without displaying anything
      rsync -aW -C /mnt/h/test/ /mnt/i/test
    • Actually mirror the content of the source directory.
      Warning! Warning! the --delete option will make sure that files present in the destination directory, but not in the source directory will be deleted! Be careful, make some tests and use the --dry-run option before using this
      rsync -aW -C --delete /mnt/h/test/ /mnt/i/test

Using ssh keys

What are ssh keys and why use them?

ssh keys are a combination of two specific (and unique) text files, the private key file and the public key file, linked by a special kind of password called the passphrase, that can be used instead of a standard password to connect securely from one server to another server

ssh keys have to be configured properly (a few easy steps), and are very convenient because:

  • They usually don't expire!
    You don't have to change them (except in some extra secure computing centers like TGCC) and you can keep them for years
  • They don't depend on the accounts and the passwords of the servers where you use them
    • You can (and should!) use the same set of ssh keys on several servers: you can then use the same passphrase to access these servers, rather than having to memorize different passwords
      e.g. if you have your private key on account_A of server_A and install the matching public key on account_B of server_B, etc… you can then use ssh on account_A@server_A to access account_B@server_B, account_C@server_C, … with the same passphrase !
    • You can give your public key to somebody and then access their account using your own passphrase (no need to know the password of the other person)
  • The IPSL Mésocentre ESPRI servers can only be accessed with a public key and passphrase (the password is not used)
  • By default, ssh will ask you to type your passphrase each time you connect to a server, but you can use an ssh agent to securely store your passphrase for you
    Once you have typed your passphrase in the ssh agent, you can connect to all the servers that have your public key without having to type your passphrase!
    • scp (and WinSCP) and the tools using ssh on your local computer will not ask your passphrase, if they find the passphrase in a running ssh agent on the local computer
      • if you use the -A option (agent forwarding), the remote server will also know (securely) your passphrase, and you will not have to type the passphrase when using ssh, scp and tools running over ssh on the remote server(s)
    • the local ssh agent is terminated when you log out of your local computer (or reboot it)

Generating ssh keys

Some common sense advice

  • Generate only one pair of private/public keys and use the same pair of keys everywhere!
    Put differently, do not generate a different pair of key on each computer/server you use (even if you always use the same passphrase)!
  • Do not use an empty passphrase!
    If you do that, somebody gaining access to your private key will be able to access all the accounts where you have installed your public key
  • Keep a backup of your your keys outside of the computer where they were generated
    • Useful if you erase or overwrite the keys by mistake, or if you move to another lab and use a new computer/account, but still need to access the accounts where you have installed your public key…
    • If you have not used an empty passphrase, and have not saved the passphrase in a file with the keys, the keys can't be used easily by somebody else to gain access to your accounts
  • Do not forget your passphrase!
    Do not write your passphrase on a postit taped to your computer. When you create your keys and type your passphrase, choose something that you will be able to remember during several years

Generating keys in a terminal

Remember that if you already have a pair of keys, you probably don't want to generate a new pair, unless you have been asked to, or have lost one of the keys, or forgotten your passphrase. If you generate a new pair of keys, you will probably have to replace the old keys that you were using on all the remote servers

There are several ways to generate pairs of ssh keys with ssh-keygen. The following one is the one recommended for opening an account on IPSL Mésocentre ESPRI. If you open an account on ciclad, but already have a public key, just send your existing public key!

  • Type ssh-keygen -t rsa -b 4096
    • Accept the default path and key name
    • Do not specify an empty passphrase!
  • This will generate two text key files in a sub-directory of your account (~/.ssh/ on Linux, C:\Users\my_login\.ssh\ on Windows 10):
    • The private key, that has to be readable only by you: id_rsa
       > cd ~/.ssh
       > ls -l id_dsa
      -rw------- 1 my_login my_group some_date id_rsa
       > cat id_rsa
      -----BEGIN RSA PRIVATE KEY-----
      Proc-Type: 4,ENCRYPTED
      DEK-Info: AES-128-CBC,906569054A4C58A28AD23CBA28771EDE
      
      C/Aacy+qcSWIG56eWc3XQhm2oyfAVKFKVm54pwoCmIZ5nmLx/8kV8XcDcMHxoWIz
      xgc3cPwxNczIS/i4A0AOk3uI8JiT8RVLELVbn+B5T0ewbvMjln4Ec/7W9+aNe/NF
      [ lots of literally cryptic lines ]
      v/rj1Ze/PEQ+nVX3dh3FB1TaL/aNm48PBP9WQQXm011PY6isZJklyWANGJ6jtOf9
      -----END RSA PRIVATE KEY-----
    • The public key: id_rsa.pub
      This is the information that you can share. Note that the my_login@my_machine at the end of the line is just some information about who generated the keys, and where, and can be removed or replaced by something more informative
       > cat id_rsa.pub
      ssh-rsa AAAAB3NzaC1yc2EAAAADAQ [ lots of cryptic characters ] 8WPbpreOOrIbNw== my_login@my_machine

Generating or importing keys with PuTTY on a Windows computer

Read the Converting/Creating ssh keys with PuTTYgen sub-sections of Using ssh keys, on the PuTTY page

Installing ssh keys

Using the keys

Using an ssh agent

An ssh agent running on your computer will securely store your passphrase and supply it to applications that use ssh on your computer to connect to remote Linux servers

  • start the agent when you open a new session on your computer
  • enter your ssh passphrase(s). An agent can store multiple passphrases associating multiple pairs of private and public ssh keys, but you can also use the same public key on different remote Linux servers
  • the ssh agent will store your passphrase until you exit your session, or restart your computer

Linux ssh agent

FIXME

Windows

On Windows, you should use Pageant as an ssh agent

Mac

Nothing to configure!

The ssh-agent process will be automatically started, if a user runs ssh or ssh-add!

Check the launchd documentation if you need more details

$ launchctl list | grep ssh
      7240	0	com.openssh.ssh-agent

It seems that, once used, the passphrase will be automatically stored in the Keychain for future sessions

More...

  • If you want to know more (options, etc…), check the man(ual) page on Linux: man ssh
  • Editing remote text files with emacs (implicit scp): /user@server:/path/file
  • Digging ssh tunnels when using ipython notebooks





[ PMIP3 Wiki Home ] - [ Help! ] - [ Wiki syntax ]

other/ssh.1660308821.txt.gz · Last modified: 2022/08/12 12:53 by jypeter