This is an old revision of the document!
Official details :
cdat_multi configuration version: 13
Official details :
cdat_multi configuration version: 12
Official details : 2.0.beta
cdat_multi configuration version: 11
Machine | Config | Python/date | Notes |
---|---|---|---|
LSCE | LSCE_11 | 2.7.7, Aug 1 2014 | Used the same recompiled cmake and Qt as for 1.5.1 |
LSCE | ciclad_11-ng | 2.7.7, Aug 4 2014 | Used the same recompiled cmake and Qt as for 1.5.1 |
2 Packages reported as FAILED, see logs contrib/pyclimate contrib/MSU
53% tests passed, 35 tests failed out of 74 Total Test time (real) = 1020.63 sec The following tests FAILED: 2 - cdms_test (Failed) 3 - cdms_verify (Failed) 4 - cdms_load_and_plot_axis_variable (Failed) 5 - run_uvcdat_gui_tests (Failed) 6 - test177_regrid_mask (Failed) 8 - testDoutriaux (Failed) 9 - testMarvel (Failed) 10 - testUnits (Failed) 11 - testRaynaud (Failed) 12 - testDateline (Failed) 14 - testDiag (Failed) 15 - testSo2TasACCESSFails (Failed) 16 - testSo2Tas (Failed) 17 - testWrite (Failed) 18 - testMvCdmsRegrid (Failed) 21 - testConserv (Failed) 22 - testEsmfVsLibcf (Failed) 23 - testEsmfInterface1 (Failed) 28 - testTasRegrid (Failed) 30 - testRegrid2 (Failed) 34 - testEsmf_3x4_6x8_Conserve_Masked (Failed) 36 - testMvGenericRegrid (Failed) 37 - testSalinity (Failed) 38 - testEsmfSalinity (Failed) 39 - testEsmf (Failed) 40 - testBergman (Failed) 41 - testDistSrc (Failed) 43 - vcs_verify_import (Failed) 44 - vcs_verify_init (Failed) 45 - vcs_verify_boxfill_basics (Failed) 46 - vcs_verify_proj_basics (Failed) 47 - vcs_verify_fillarea_basics (Failed) 66 - CDMS_Test_17 (Failed) 68 - CDMS_Test_multiple_formats (Failed) 74 - diags_test_01 (Failed)
ccmake -D GIT_PROTOCOL=git:// -D CDAT_BUILD_PARALLEL=OFF -D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON -D CMAKE_INSTALL_PREFIX=$CDAT_INSTALL $CDAT_MAIN_DIR
Same as for 1.5.1
Same as for 1.5.1
The following disk space was required for the installation
Web site: http://docs.python-requests.org/en/latest/
Install: pip install requests
Official details : 1.5.1
cdat_multi configuration version: 10
The default backend for matplotlib (Agg) could not be used for interactive graphics and we had to manually update the content of the default matplotlibrc
<INSTALL>/lib/python2.7/site-packages/matplotlib/mpl-data/matplotlibrc #backend : Agg backend : Qt4Agg
Machine | Config | Python/date | Notes |
---|---|---|---|
LSCE | LSCE_10 | 2.7.4, Apr 23 2014 | Had to use recompiled cmake (2.8.12.2) and Qt (4.8.5) because the system ones were too old |
ciclad | ciclad_10 | FAILED![]() | Linux too old, even when specifying recent gcc44/gfortran44/g++44 compilers, we end up with too many problems, … ![]() |
ciclad-ng | ciclad_10-ng | 2.7.4, Apr 22 2014 | Had to use recompiled cmake (2.8.12.2) and Qt (4.8.5) because the system ones were too old |
VirtualBox FC20 | VB_10 |
3 Packages reported as FAILED, see logs contrib/pyclimate contrib/MSU contrib/windspharm
89% tests passed, 8 tests failed out of 71 The following tests FAILED: 1 - run_uvcdat (Failed) 2 - cdms_test (Failed) 3 - cdms_verify (Failed) 4 - cdms_load_and_plot_axis_variable (Failed) 5 - run_uvcdat_gui_tests (Failed) 44 - vcs_test_anim_basic (Failed) 64 - CDMS_Test_18 (Failed) 66 - CDMS_Test_multiple_formats (Failed) Errors while running CTest
ccmake -D GIT_PROTOCOL=git:// -D CDAT_BUILD_PARALLEL=OFF -D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON -D CDAT_BUILD_PARAVIEW=OFF -D CDAT_BUILD_GUI=OFF -D CMAKE_INSTALL_PREFIX=$CDAT_INSTALL $CDAT_MAIN_DIR
If you want to test UV-CDAT with 'ctest' after the build, it must be installed with -D BUILD_TESTING=ON (which seems to be defined by default so we have not added it explicitly to the ccmake options)
It's better to specify explicitly the git protocol to use for downloading submodules in $CDAT_MAINDIR/contrib (-D GIT_PROTOCOL=git:// for all the machines we used), otherwise ccmake gets stuck in a long guru meditation when it's waiting/trying to download external sources.
In order to determine which protocol to use, go to a temporary directory and check by hand which protocol is working. If nothing happens (seems to hang and you have to interrupt with CTRL-C), it's NOT working:
IF “git clone git” fails, THEN specify '-D GIT_PROTOCOL=http://', otherwise specify '-D GIT_PROTOCOL=git://'
WARNING! WARNING! Check the git protocol overrides remaining from previous CDAT installations with git config –global -l, in remove some lines in ~/.gitconfig if need be…
We have used -D CDAT_BUILD_PARALLEL=OFF in order to disable parallelism and avoid potential mpi-related problems
We have used the following options in order to use the xml2/xslt libraries preinstalled on the system and avoid potential compilation problems. As of version 1.5.1, uv-cdat can compile libxml2 if the one available on the system is too old, but the rest of the installation still picks up the old system xml2 library
-D CDAT_BUILD_LIBXML2=OFF -D CDAT_USE_SYSTEM_LIBXML2=ON -D CDAT_BUILD_LIBXSLT=OFF -D CDAT_USE_SYSTEM_LIBXSLT=ON
We have to disable the GUI in 1.5.0-1, with -D CDAT_BUILD_GUI=OFF. Otherwise ccmake does not work due to vistrails related problems
Paraview can't be installed, due to R include files not found. Disabling the GUI with -D CDAT_BUILD_GUI=OFF
is not enough, so we have to disable it with -D CDAT_BUILD_PARAVIEW=OFF. We then have a problem with pixman being built before freetype so we have to add that pixman depends on freetype
in src/CMake/cdat_modules/pixman_deps.cmake:
set(pixman_deps ${pkgconfig_pkg} ${zlib_pkg})
⇒ set(pixman_deps ${pkgconfig_pkg} ${zlib_pkg} ${freetype_pkg})
/etc/redhat-release | Red Hat Enterprise Linux Server release 6.5 (Santiago) |
uname -a | Linux asterix1 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Dec 13 06:58:20 EST 2013 x86_64 x86_64 x86_64 GNU/Linux |
gcc | gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
gfortran | GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
g++ | g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
Qt | qt-4.6.2-28.el6_5.x86_64 ⇒ had to install 4.8.5 |
cmake | cmake-2.6.4-5.el6.x86_64 ⇒ had to install 2.8.12.2 |
/etc/redhat-release | CentOS release 5.2 (Final) |
uname -a | Linux ciclad1.ipsl.jussieu.fr 2.6.18-348.4.1.el5 #1 SMP Tue Apr 16 15:40:06 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux |
gcc44 | gcc44 (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
gfortran44 | GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
g++44 | g++44 (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) |
Qt | qt4-4.7.4-0 ⇒ had to install 4.8.5 |
cmake | cmake-2.6.4-5.el5.2 ⇒ had to install 2.8.12.2 |
/etc/redhat-release | Scientific Linux release 6.5 (Carbon) |
uname -a | Linux ciclad-ng.private.ipsl.fr 2.6.32-431.11.2.el6.x86_64 #1 SMP Tue Mar 25 11:15:18 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux |
gcc | gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
gfortran | GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
g++ | g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) |
Qt | qt-4.6.2-26.el6_4.x86_64 ⇒ had to install 4.8.5 |
cmake | cmake-2.6.4-5.el6.x86_64 ⇒ had to install 2.8.12.2 |
/etc/redhat-release | Fedora release 20 (Heisenbug) |
uname -a | Linux lsce3017.extra.cea.fr 3.13.10-200.fc20.x86_64 #1 SMP Mon Apr 14 20:34:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux |
gcc | gcc (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
gfortran | GNU Fortran (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
g++ | g++ (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) |
Qt | qt-4.8.5-15.fc20.x86_64 |
cmake | cmake-2.8.12.2-2.fc20.x86_64 |
The following disk space was required for the installation
Machine | -A- cmake compile (1) | -B- cmake install | -C- qt compile (1) | -D- qt install | -E- cdat src (2?) | -F- cdat build (2) | -G- cdat install (2) | -H- Externals (3) Sub-dir of install | -I- Installation space (4) | -J- Final space (5) |
---|---|---|---|---|---|---|---|---|---|---|
LSCE | 230M | 69M | 1.6G | 451M | 407M | 3.2G | 1.1G | 372M | 5.21G | 1.54G |
ciclad | ? | 66M | ? | 455M | 407M | 2.8G FAILED ![]() | 390M FAILED ![]() | 176M FAILED ![]() | ![]() | ![]() |
ciclad-ng | ? | 69M | ? | 449M | 407M | 3.1G | 1.1G | 366M | 5.10G | 1.54G |
VirtualBox FC20 | 0 (6) | 0 (6) | 0 (6) | 0 (6) | 407M | 3.6G | 1.2G | 325M | 5.20G | 1.2G |
Notes:
Official details : n/a
cdat_multi configuration version: 09
Check the installation details of 1.5.1 above. Installation tests of 1.5.0 were stopped as soon as 1.5.1 was available
Machine | Config | Notes |
---|---|---|
LSCE | LSCE_09 |
Official details : n/a
cdat_multi configuration version: 08
Machine | Config | Python/date | Notes |
---|---|---|---|
LSCE | LSCE_08 | 2.7.3, Nov 13 2012 | |
TGCC | curie_08 | 2.7.3, Oct 29 2012 | The only CDAT available @ TGCC as of April 2014 |
Official details : n/a
cdat_multi configuration version: 02
Machine | Config | Python/date | Notes |
---|---|---|---|
ciclad | ciclad_02 | 2.7.1, Aug 12 2011 |
[ PMIP3 Wiki Home ] - [ Help! ] - [ Wiki syntax ]